Performance Tested Seals
Return to home page
View the product information page
View record holders
View customer vehicles
View clients opinion
View product dealers
View tips on part usage
View Contact details
menu footer
Contact Details

13b Davison Street
Maddington WA 6109
Australia

P: 618 9459 8155
F: 618 9493 3181
M: 0401 383 763
E: Peter Glover


Installation Recommendations

  • Before installing ensure the rotor housings are in good condition and meet the factory specifications.

  • Ensure the seal moves freely in the rotor prior to installation.

  • Superglue corner piece, to PTS seal.

On Engine Start Up and Running

  • Performance Tested Seals require an oil additive to be added to the fuel to lubricate the apex seals.

  • It is recommended that you use a minimum of 1% of oil additive to suit fuel being used. ie. methanol use castor based oil

  • PTS highly recommends that you do not run your engine lean, as this also reduces lubricant to the seals. PTS seals better than any other seal in the market place therefore create more horse power and more combustion temperature. You will be required to use more fuel to achieve a better burn and quench combustion temperatures. Do not forget, more fuel, more horsepower.

Not Recommended

Worrying about breaking a PTS apex seal, as our seals are guaranteed not to break in your engine!

These seals do not wear the housings or rotors.

If you have any questions or concerns about these seals, please email Peter Glover and he will contact you. Just click here to send an email to him.